X10 Community Forum
🔌General Home Automation => Automating Your House => Topic started by: callagga on June 11, 2010, 09:40:21 PM
-
Hi,
I'm after an X10 LED or small bulb device. So far people have pointed out an LM15 that could be used, however this seems to be for a full size bulb. I actually want to switch/on/off small bulbs or ideally LEDs, as I want to build a few of them into an indicator board.
Any suggestions?
thanks
-
X10 does not make a LM15A "Socket Rocket" that small, it accepts only a standard threaded lamp, either a standard bulb or a CFL.
LEDs can be controlled from an Appliance Module, a lamp module cannot be used.
-
Oh. Do you any model numbers for the Appliance Modules you mention? What would be the most basic ones that could be useful for just controlling a few LEDs for example?
-
Use Christmas lights powered by an appliance module AM486. And if you use a flasher, it will automatically blink when on.
-
Use Christmas lights powered by an appliance module AM486. And if you use a flasher, it will automatically blink when on.
ok I see what you mean - as I'd have several indicator lights (say 2-5) do you know if theres is (to save money) one device that would have 2-5 outputs here each output with it's own address?
-
I'd have several indicator lights (say 2-5) do you know if theres is (to save money) one device that would have 2-5 outputs here each output with it's own address?
http://www.smarthome.com/2316/8-Channel-5-Amp-X10-Relay-Control-Unit-8R5PX/p.aspx
-
thanks - (I'll have a look on the European store to see if there's one for 240V, but otherwise it seems like I could just find a different power pack and this would be ok)