Anybody know if X10 has glass breakage sensors available?
If so, where at?
Thanks
you could use the DS10a with glass break tape.
The X10 GB10A Glass Break Detector was discontinued a long time ago.
I used a Visonic Glasstech acoustic glass break detector:
http://www.homesecuritystore.com/p-499-glasstech-visonic-glasstech-acoustic-glassbreak-detector.aspx
in series with a ds10a door switch for our sun room. I used a 12VDC plug-in power supply to
power the sensor. Either the door switch or the sensor will trigger the DS7000 console on that zone.
Hope this helps!
Jack
:)
Quote from: Brian H on August 17, 2010, 07:57:49 PM
The X10 GB10A Glass Break Detector was discontinued a long time ago.
But the DS10 is still sold by x10 USA.