X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: glenn2010 on November 20, 2010, 12:16:26 PM
-
Greetings Forum Members,
I just registered my AHP for the first time this morning and seem to be stuck at the "Timed Events" screen.
It appears that my CM15A is not sending a signal to my AM466 to turn on after the 60 second timer times out.
The AM466 is set to A and 1.
B:(
-
I just did a test of the Wizard and it will not work with a Appliance Module. Only a lamp module.
Seems it does not send an on and off with the timer. It sends Bright signals the Appliance Module will not respond to.
Log from my monitoring system:
R: A1 - 12:51:37 PM 11/20/2010
R: AOn - 12:51:38 PM 11/20/2010
R: A1 - 12:51:38 PM 11/20/2010
R: AOff - 12:51:39 PM 11/20/2010
R: A1 - 12:51:43 PM 11/20/2010
R: AOff - 12:51:43 PM 11/20/2010
Timer Test here:
R: A1 - 12:52:44 PM 11/20/2010
R: ABright - 12:52:45 PM 11/20/2010
R: ABright - 12:52:45 PM 11/20/2010
R: ABright - 12:52:45 PM 11/20/2010
R: ABright - 12:52:46 PM 11/20/2010
R: ABright - 12:52:46 PM 11/20/2010
R: ABright - 12:52:47 PM 11/20/2010
R: ABright - 12:52:47 PM 11/20/2010
R: ABright - 12:52:48 PM 11/20/2010
R: ABright - 12:52:48 PM 11/20/2010
R: ABright - 12:52:49 PM 11/20/2010
R: ABright - 12:52:49 PM 11/20/2010
R: ABright - 12:52:50 PM 11/20/2010
R: A1 - 12:52:53 PM 11/20/2010
R: AOff - 12:52:53 PM 11/20/2010
-
Thanks Brian,
Since I don't have any lamp modules I am going to skip this step.All the rest of the wizard steps passed.
I guess its time to learn how to set a timed event for an appliance module.
-
You are welcome.
I also found in my tests that the remaining wizard items did work fine.
Here is a link to some added information on AHP.
http://kbase.x10.com/wiki/ActiveHome_Pro
-
Brian, I'm a bit confused. Where do you find the "AHP Intro Wizard"?
-
Hello Dan,
Look under the "Help"tab.Second from last on that list.