X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: matt832 on December 20, 2010, 05:26:36 PM

Title: Active Home Pro dusk resolution, only 16 or 32 days????
Post by: matt832 on December 20, 2010, 05:26:36 PM
I've been a long time user of the Firecracker setup with the programmable timer.  It always adjusted Dusk properly daily.  Now, I'm using AH PRO and find the dusk/dawn resolution is quite infrequent.  Ideally I'd like it everyday, but would be OK with every 5 days, but 16?  Is there any work around to fix this?
Title: Re: Active Home Pro dusk resolution, only 16 or 32 days????
Post by: Brian H on December 20, 2010, 06:28:34 PM
In mine there is a choice of 8, 16 or 32 days.
Tools
Hardware Configuration is where the choices are.
Title: Re: Active Home Pro dusk resolution, only 16 or 32 days????
Post by: matt832 on December 20, 2010, 07:50:40 PM
yeah, that's where I found it, but I only have options for 8 or 16....
Title: Re: Active Home Pro dusk resolution, only 16 or 32 days????
Post by: Dan Lawrence on December 20, 2010, 10:10:00 PM
What I get in 3.271 is this:   Every 2 days uses 7% of memory,  Every 4 days uses 4% of memory, every 8 days uses 1.5% of memory and every 16 days uses 1.7 % of memory.

Using that, every 8 days is most economical for use of CM15A memory.
Title: Re: Active Home Pro dusk resolution, only 16 or 32 days????
Post by: matt832 on December 21, 2010, 03:41:21 AM
AH, I figured it out --- you have to scroll up to see the other options!  I found the daily option, it said it would need 13% of my memory, so I opted to the 2 day setting, only 7% of my memory.  Much happier now...