X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: tigermatus9 on February 08, 2011, 05:57:03 PM

Title: all 4 cameras show same view on iphone and computer screen.
Post by: tigermatus9 on February 08, 2011, 05:57:03 PM

I have a 4 camera wireless system with iwatchmobilePRO software for my iphone.  I can use the hand held remote sent with the system to change the cameras but i can not view more than 1 camera.  The remote seems to change all views to the same camera.  I can switch but my split screen shows 4 pictures exactly the same.  I can not change cameras in on the computer or in my iphone.  Also pan and tilt does not work unless i use the hand held remote.  Please help.

Title: Re: all 4 cameras show same view on iphone and computer screen.
Post by: Brian H on February 08, 2011, 06:02:54 PM

Can you physically determine the remote is changing the camera or is the same camera never going off?
Only one camera can be on at a time or they interfere with each other.
They are all on the same House Code and Unit Codes in Groups of four. 1-4,5-8,9-12 or 13-16. Are all your addressable power supplies on the same House Code and Unit Group?

The fact that they don't pan and tilt. Seems to indicate the RF command from the remote is not getting to the Ninja Base.

Can you give us a description of the equipment you have? Like CM15A or CM19A with TM751 Interface.