Recently I discovered the "CHIME" does not sound when Open any doors or windows it happened twice to fix it I have to Arm then DisArm the console (AS1200). Any one have this problem??
So it is not any perticular Zone? When the chime goes silent. It could be any of the zones being opened?
Quote from: Brian H on April 27, 2011, 04:04:15 PM
So it is not any perticular Zone? When the chime goes silent. It could be any of the zones being opened?
all doors windows are closed ??? i did check all Zones all are silent,,,,,, also it does happen again yesterday evenning like i said i have to arm and disarm the console then the console will work normal agin i'm very sure will happen again.
I have had this problem with couple of door sensors (but not all in same time). What I found is that the rf signal reaching these sensor were borderline weak... just enough but not quite. Most of the time they work, 1 out of 5 times they don't.... when they don't.. they stay off for a while. Interestingly, I never had problems arming the system with these problem sensors. I had to rotate or reposition (it was on metal... rebar I would guess) in my house. I have 10 door/windows sensors deployed and will eventually have a total of 17 seventeen.
well' even my sensor 5 feet away from console won't do quart i have to arm and then disarm the console to have it work normal.
Sounds more like another console problem.
Quote from: Brian H on April 28, 2011, 06:03:31 PM
Sounds more like another console problem.
Brian,
i have no idea other then that everything working ok just keep on "arm/disarm" to fix it Ooh!! well.
thanks
Well. We will make a note of your findings and pass them on to any other user reporting the same problem.