X10 Community Forum
🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: ericson on August 16, 2011, 11:37:55 AM
-
Hello and hope someone can help me.
I was going to try to get a PZZ01 installed in my house. The problem that i came across is that the neutral line coming in to my house from the meter is bare wire. Is there any way to install the PZZ01 over this or not. I tried to figure this out but had trouble even finding an example of bare neutral wires coming from the meter.
Thanks in advance,
Eric