X10 Community Forum

💬General Category => General Discussion => Topic started by: Loveheart on December 24, 2011, 06:46:18 AM

Title: MS20E/BNL
Post by: Loveheart on December 24, 2011, 06:46:18 AM

hello everyone

i have the MS20E/BNL WIRELESS MOTION SENSOR

how must do when you come a light on and when you go light off.

i have no manual of it,also not found on internet

who can help me step by step

Title: Re: MS20E/BNL
Post by: Brian H on December 24, 2011, 07:39:30 AM

Do you even know if it is X10 compatible?
I also searched and didn't find much, except a few threads on using a MS20 {MS20E found nothing} in some outdoor camera triggers.
Also found an Atlas MS20E Microphone Stand.

Title: Re: MS20E/BNL
Post by: Loveheart on December 24, 2011, 10:18:35 AM

it's from marmitek
you only find it on internet under PROTECTOR28

marmitek has sell that into a pakket for europa

i know i must make a macro for that,but how must i do that
and need i flags? who can help me with a sample of it

Title: Re: MS20E/BNL
Post by: Brian H on December 24, 2011, 10:58:32 AM

Are you trying to use the sensor with a CM15Pro?
As you mentioned macros.
I still could not find anything on a MS20E/BNL on the Marmitek site or in a PROTECTOR28 manual.
Is it a security type or a standard motion sensor?

Title: Re: MS20E/BNL
Post by: Loveheart on December 24, 2011, 03:43:44 PM

http://files.domoticaforum.eu/Manuals/Marmitek/Dutch/9506.pdf

there you can find it but i have see there is another number on it but it's the same
Look at 4.4 MS10 BEWEGINGSMELDERS.
i shall place a link with photo's of it,than you see the numer on it MS20E/BNL
but look the same with the same buttons on the picture of 4.4 MS10 BEWEGINGSMELDERS

here the link of the photo's:  http://lisa-x10.webklik.nl/page/temp

i have make two photo's front and back

Title: Re: MS20E/BNL
Post by: Brian H on December 24, 2011, 04:28:26 PM

It does look like a MS10 and they put their part number on it.

So you want to know how to add it to your CM10Pro with AHP and make a macro?

Title: Re: MS20E/BNL
Post by: Loveheart on December 24, 2011, 05:08:06 PM

yes you have understand it good

can you make a sample for me or explain step by step