X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: hdservices on April 07, 2012, 09:43:32 AM

Title: Resetting AW12
Post by: hdservices on April 07, 2012, 09:43:32 AM

Hi,

I have 1 AW12 module where I lost his code , I have tried all of them, but nothing will work.
We would like to reset the module so it goes back to A1 again.
How can we do it? Because we lost it we need to do this hardware based.

Like to hear, thanks.

Regards,

HD Services

Title: Re: Resetting AW12
Post by: Dan Lawrence on April 07, 2012, 10:21:54 AM

The AW12 is a Marmatek module, suggest you contact them.

Title: Re: Resetting AW12
Post by: dave w on April 07, 2012, 10:36:20 AM

http://www.marmitek.com/en/product-details/home-automation-security/x-10-home-automation/dimmers-and-switches/aw12.php

Title: Re: Resetting AW12
Post by: Brian H on April 07, 2012, 10:45:06 AM

Have you tried a power off reset. It maybe confused and not responding to power line commands.
The reset procedure is in the manual dave w pointed out.
If it still doesn't respond. It has failed or you have a power line signal problem to its location.