X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: kiwipride on August 27, 2012, 05:13:46 PM

Title: Newbie Question Cm19E
Post by: kiwipride on August 27, 2012, 05:13:46 PM

Hi Guys

Would appreciate your help on this. Does the CM19E work direct with socket modules (HA122)? Or am I missing something?

Thank you

Title: Re: Newbie Question Cm19E
Post by: Brian H on August 27, 2012, 06:08:33 PM

Took a short time to find. The HA122 is a Winpluss Automation Stock Number for a LM15E with screw type base.

No a CM19E will not control a HA122 {LM15E} Lamp Module directly.
It sends and receives X10 RF commands only. The HA122 {LM15E} uses power line signals. You need a transceiver to take the RF and convert it to a power line command.

Looks like you are using European X10 so the TM13E is what is used.

Title: Re: Newbie Question Cm19E
Post by: Dan Lawrence on August 27, 2012, 08:15:48 PM

Specs for the TM13E:  230VAC - 50 Hz - 300W LOAD RATING.