X10 Community Forum

📸Cameras & Camera Software => AirSight Cameras => Topic started by: Deemoore on January 23, 2013, 03:08:36 PM

Title: IPCAMCLIENT
Post by: Deemoore on January 23, 2013, 03:08:36 PM

IPCAMCLIENT

Program closed unexpectedly and now no passwords will let me back in.

anyway to reset or reinstall this software?

Tried admin
tried admin/admin
tried removing and reinstalling

Title: Re: IPCAMCLIENT
Post by: richy2 on January 23, 2013, 04:18:17 PM

Quote from: Deemoore on January 23, 2013, 03:08:36 PM

IPCAMCLIENT

Program closed unexpectedly and now no passwords will let me back in.

anyway to reset or reinstall this software?

Tried admin
tried admin/admin
tried removing and reinstalling

FOR AIRSIGHT PTZ PRO

I had that same problem today and it took me a good while to fix it.

I kept deleting the camera in the client and adding it back.
I rebooted the computer a number of times.

After i did search and the ip address was entered.. i also made sure the device name field had something entered.

I ve done the right click in the cam window to bring up the box to click connect.

I ve used the connect icon to the right to try and connect

Ive done the above things a lot of times... it took me about a 30 minutes but it eventually worked.

SIDEBAR:  I have never updated my firmware since the camera was working and if its not broke don't fix it ( UPGRADE FIRMWARE ) and break it.

Title: Re: IPCAMCLIENT
Post by: Deemoore on January 28, 2013, 12:01:00 PM

going to restart everything using my laptop.
Then try to clear the IPCAMCLIENT off the pc.

Title: Re: IPCAMCLIENT
Post by: Deemoore on January 28, 2013, 03:40:55 PM

Quote from: Deemoore on January 28, 2013, 12:01:00 PM

going to restart everything using my laptop.
Then try to clear the IPCAMCLIENT off the pc.

Ok I removed IPCAMCLIENT with software removal
Reinstalled it and selected a Different Directory ... to put it in.
then is started up with admin/admin.