X10 Community Forum
📸Cameras & Camera Software => AirSight Cameras => Topic started by: GTPETE on June 08, 2013, 05:06:08 PM
-
Hi fellas I have recently purchased PTZ airsight pro cams and have everything running correctly. I do have one question that i cannot seem to get an answer to: is there any way to record the motion only on multiple cams? so that i would be able to get small files of motion only depending on what cam they were detected on? Appreciate the assistance if you can help.
Pete
-
Hi fellas I have recently purchased PTZ airsight pro cams and have everything running correctly. I do have one question that i cannot seem to get an answer to: is there any way to record the motion only on multiple cams? so that i would be able to get small files of motion only depending on what cam they were detected on? Appreciate the assistance if you can help.
Pete
If i am understanding your question.. let me try.
First, I just tired to record 2 cameras at the same time ( WITHOUT MOTION DETECTION ) by pressing the record.
NOTE. i opened 2 IE windows using each of the cameras IP ADDRESSES .. i did not use multi-view option.
Both videos did record in the same path settings.
NOTE: i tried to change the path for the camera to record to different sections of my hard drive.
when i change 1 path, the other path changes to the same path.
I must assume that you can not set 2 or more different paths for recording multi-cameras.
with the above test i must assume you can set the motion detection to record on each camera but they would probably record to the same path settings.
It shouldn.t be to much of a problem if you record to a external HD or a High Capacity SD Car