X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: mick1 on January 27, 2014, 03:04:37 AM

Title: CM15: crazy Transmit
Post by: mick1 on January 27, 2014, 03:04:37 AM

I have an issue with the CM15 and AHP:

I have a macro acting crazy and sending "Transmit" to one of my relays switching it on or off when it should not.
I try to clear the CM15 memory, reload it, set the Transceived House Code(s) to NONE, etc but with no success.

Thank you for any help.

Edit: I just find a similar thread "CM15A sending unscheduled commands". The problem was solved by unpluging the USB from the computer, I will try this.

Title: Re: CM15: crazy Transmit
Post by: HA Dave on January 27, 2014, 07:16:50 PM

Quote from: mick1 on January 27, 2014, 03:04:37 AM

...I try to clear the CM15 memory, reload it, set the Transceived House Code(s) to NONE, etc but with no success.
Thank you for any help.

Sometimes leftover [deleted] macros in the trash/recycle bin can still affect loaded macros. Make sure you clear/empty the trash of any old macro/modules before saving and uploading macros. Also make sure the letter/number of the modules acting up... isn't being used twice... maybe in another room/macro.