X10 Community Forum
📱X10 WIFI => 🗯General Discussion => Topic started by: akeene on February 24, 2018, 12:33:39 AM
-
Just looked at WM100 in the dark.
The blue light is a good "night light"
But on the left side close to the back, can be seen a red glow.
I have not opened the WM100 yet to see why(what) the light is for.
Mine has worked out of the box without any problems.
Removed all my C15A(s) and AH. Do miss the rolling history.
And the ability to save a log.
Once they come out with a browser, things will change I am sure of that.
thx
-
The blue LED on the WM100 flashes reddish orange when X10 commands are on the powerline. Could you be seeing that?
-
The blue LED on the WM100 flashes reddish orange when X10 commands are on the powerline. Could you be seeing that?
It is a separate light, glows yellow, can be seen from the back of the WM100. I noticed it also, I presume it is some pilot light on the motherboard.
-
But on the left side close to the back, can be seen a red glow.
E.T.
-
There is another LED inside Im not sure why it is there as my first an second gen test units never had one.
-
Yea, blue on solid. So the red is coming from inside as others have stated.
LED on board inside would add to cost.
As long as it works, they could add 12 lights, one for each hour for all I care.
1. It works
2. easy to setup.
3. I love blue lights.
-:) :)%