X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Software Problems & Bugs => Topic started by: X10 Pro on December 15, 2004, 08:04:36 PM
-
A couple requested changes, and some
improvements:
- Added item to Preferences to allow
minimize to task bar or only to system tray.
- Added a keyboard shortcut (F3) to open
interface status report.
- Fixed use of the wrong poll command and
status update for the RR501.
- Fixed a crash attempting to open Activity
Monitor when it's minimized.
- Fixed a crash dragging an item in the
Macro Summary.
- AHP now cancels delayed macro events after
downloading new data so that references to
old data aren't made.
- AHP now automatically downloads the last
saved file data to the interface in all cases
of an EEPROM error report.
- Improved handling of EEPROM read when
ActiveHome Pro starts up.
You can download the update installer
directly from:
http://software.x10.com/pub/applications/activehome/ahp_updt.exe
-
I just noticed that my battery time has
reset to zero, again. I wish I had checked
it before the upgrade that I just did to
see if it was the upgrade cleared it.
-
I haven't seen mine work yet
-
My battery time also reset to zero after
the upgrade and I did check it before the
upgrade. It was at 48 before the upgrade.
In spite of the battery time being at zero
the battery status indicator is green.
Also something in the upgrade process
appears to have cleared the monitored house
code register in the CM15A as all of the
modules that were on were shown as off in
the GUI display and the status report.
They are all correct this morning after
every module has been through an off/on
cycle.
-
We'll take a look at the battery
status/monitored house code reset.