X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Software Problems & Bugs => Topic started by: nswint on March 27, 2005, 10:23:13 PM

Title: Dim Function Off
Post by: nswint on March 27, 2005, 10:23:13 PM

The dim function will not allow you to select
30, 60 , or 80 percent.  You can go up a
number to  31, 61, or 81

Title: Re: Dim Function Off
Post by: roger1818 on March 27, 2005, 10:41:21 PM

That is because the Extended Dim command
only has 64 brightness levels to choose
from so approximately every third percent
cannot be set.

Title: Re: Dim Function Off
Post by: X10 Pro on March 28, 2005, 02:38:07 PM

This is in the Macro Designer, right? I
notice that if you choose an absolute level
you can't select 80% (but can set 81%) but
with just a dim command you send 80%. This
probably is a quirk in how we're creating the
dim slider in the user interface, and not a
direct reflection of the X10 protocol. I'll
see if we can fix it.