X10 Community Forum
📸Cameras & Camera Software => Camera General Discussion => Topic started by: tc on August 03, 2005, 03:13:41 AM
-
Any suggestion son how to improve reception
for wireless cameras on ninja mount? I saw
one psot suggessting separting the antenna
from the camera to stablize the antenna
posiiton. Currently, when the nunja moves
the camera, my picture quality suffers.
-
Since the transmitter is fixed onto the
camera, and is directional, of course the
quality will change with the turning and
tilting of the transmitter.
If you do not wish to remove the
transmitter ... you should make sure that
the transmitter is facing the general area
of the receiver, and that the receiver's
antenna is pointed towards the Ninja.
Set the sweep points to the outer limits of
the picture before it becomes unwatchable.
Things to try ...
- move your receiver closer so that it gets
a stronger signal from sharp angles.
- move the Ninja to a location that gives
better reception
- use a repeater
- reduce the sweep area
- set up another camera to cover area not
broadcasted clearly