X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: gordo s on January 24, 2006, 05:02:25 PM

Title: Wall receptacle modules
Post by: gordo s on January 24, 2006, 05:02:25 PM

I have purchased and returned 3 wall modules,
and the replacements do not work either.  I
have installed a bridge, and all other X10
items in the house work correctly.  I can get
them to switch if I pull powered item plug,
and then replace it.  But, no joy automatically.

Title: Re: Wall receptacle modules
Post by: JERRY V on January 24, 2006, 06:12:30 PM

YOU DO KNOW THAT ONLY ONE OF THE TWO PLUG
SOCKETS WILL SWITCH , AND THE OTHER ONE IS
ON ALL THE TIME. I'VE NEVER HAD A WALL PLUG
THAT DID NOT WORK.

Title: Re: Wall receptacle modules
Post by: Brian H on January 24, 2006, 06:20:28 PM

What are you connecting to the module? Wall
switch module. Do you have a model number?

Title: Re: Wall receptacle modules
Post by: Brian H on January 24, 2006, 06:21:54 PM

OH yes as Jerry said. Only one outlet on the
module goes on and off the other one is on
all the time. Anything in the unswitched
outlet never goes off.