X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: GMBAL4 on June 26, 2006, 01:27:06 AM

Title: VIDEO RECEIVER
Post by: GMBAL4 on June 26, 2006, 01:27:06 AM

Hello I have the model VR-30A and I would like to get a replacment can I use the VR-36A or do I have to stick with what I have??

Title: Re: VIDEO RECEIVER
Post by: GMBAL4 on June 26, 2006, 11:53:29 AM

anybody???

Title: Re: VIDEO RECEIVER
Post by: billy on June 26, 2006, 12:09:49 PM

The VR30A has video and stereo audio, the VR36A is video only, the VR31A is video and mono audio.
So it depends on your application requirements, for a suitable replacement.

Title: Re: VIDEO RECEIVER
Post by: GMBAL4 on June 27, 2006, 01:55:32 PM

I just want it to work with my cameras thnaks for the help. I do have a wired camera and the receiver that came with it will not work,
thnaks for the help

Title: Re: VIDEO RECEIVER
Post by: billy on June 27, 2006, 02:21:29 PM

I do have a wired camera and the receiver that came with it will not work

Normally "wired cameras" do not use or need a receiver, they just need to be plugged into the video input of your monitor.
Unless your using a wireless video/audio sender like a VT32A.

Title: Re: VIDEO RECEIVER
Post by: GMBAL4 on June 28, 2006, 11:43:22 AM

I have a VT30-A and it will not receive the signal from my wireless night cam I do not know why. I`ll order a new one from e-bay.

Title: Re: VIDEO RECEIVER
Post by: billy on June 28, 2006, 01:28:40 PM

You mean VR30A,  VT30A is a transmitter not a receiver.
Did you make sure that the channel on the camera matched the receiver?

Title: Re: VIDEO RECEIVER
Post by: GMBAL4 on June 28, 2006, 03:12:27 PM

Quote from: billy on June 28, 2006, 01:28:40 PM

You mean VR30A,  VT30A is a transmitter not a receiver.
Did you make sure that the channel on the camera matched the receiver?

Hey Billy on the bottom of the nsender it says it is a VT30A and yea I tried changing channels and it did not work for me I guess this unit is only for the wired cameras?

Title: Re: VIDEO RECEIVER
Post by: GMBAL4 on June 28, 2006, 03:23:53 PM

okay after my post I went to the front room and I have 2 x10 products one is a sender and the other is an receiver. What is the sender used for?? it has audio and video the one that is damaged sortof  is also audio and video. any ideas what I use the sender for??

thnaks for the help :)