X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Software Problems & Bugs => Topic started by: kimndave on June 27, 2006, 09:09:26 AM

Title: Issues after upgrading to AHP v3.203
Post by: kimndave on June 27, 2006, 09:09:26 AM

I upgraded to the new version of AHP (3.203) and after doing so, I am unable to control my lights from my Palm Pad Remote and the timers are not working (I haven't checked the light switches yet).

I haven't upgraded the software in about 18 months, because I encountered the same problem after my initial upgrade.

Any thoughts?

Title: Re: Issues after upgrading to AHP v3.203
Post by: Brian H on June 27, 2006, 04:13:58 PM

The new version may have altered the tranceived house codes for the palmpad problem.
Tools
Hardware Configuration
Tranceived House Codes.
Make sure the palmpads house code is set to be tranceived.
No thoughts on the timer thing. Did you clear the interface and reload the timers?

Title: Re: Issues after upgrading to AHP v3.203
Post by: Tuicemen on June 27, 2006, 09:28:18 PM

Besides the transcieved house code thing that Brian H you may have inadvertantly corupted your AHX file. This sometimes happens with updates, you should always have a backup saved of your configuration file (AHX). Although it is possible to find the coruption it is a lengthy task and best most times to just rebuild your file from scratch. Click on file then new,  create your rooms again and add your modules and macros then save the file(click on floppy icon in bottom right) then download to the interface.Back up your new AHX file to another place on your hard drive or a floppy! ;)

Title: Re: Issues after upgrading to AHP v3.203
Post by: Dan Lawrence on June 27, 2006, 10:55:30 PM

Your .ahx files are any files you create in AHP with modules, timers and macros plus 2 that come with AHP. My AHP has 4 .ahx files I created plus the  two that come with AHP. All of the .ahx files I create are backed up to a folder on a different drive than AHP is on.

I've never had a problem with any update since I got AHP last July.

Title: Re: Issues after upgrading to AHP v3.203
Post by: kimndave on July 05, 2006, 08:12:49 AM

Thanks everyone! With all of the posted suggestions, I was able to get AHP running as normal again!

Title: Re: Issues after upgrading to AHP v3.203
Post by: steven r on July 05, 2006, 08:16:53 AM

Quote from: kimndave on July 05, 2006, 08:12:49 AM

...With all of the posted suggestions, I was able to get AHP running as normal again!

So did it turn out to be "transcieved house code thing", a corupted AHX file or something else?