X10 Community Forum

💬General Category => General Discussion => Topic started by: wejaz28 on August 19, 2006, 05:21:50 PM

Title: Commander stop function
Post by: wejaz28 on August 19, 2006, 05:21:50 PM

I am able to program the record function but the commander will not turn off the vcr after the programmed time. I followed the directions for programming the stop mode after programming the record function, but then neither works. am i forgeting something?

Title: Re: Commander stop function
Post by: FrankIII on June 10, 2007, 04:24:19 PM

I'm having the exact same problem.  One thing I was able to do, which didn't fix the problem, was look at the IR emitter with night vision goggles.  I see the "Record" IR code being sent but the "Stop" IR code is not being sent.  The programming when just like the instructions said.   

Title: Re: Commander stop function
Post by: FrankIII on June 10, 2007, 04:43:19 PM

I figured it out, I didnt relize that the vcr commander cannot be changed from 5 min., unlike the active eye can.