I've found documentation on, or referring to, several addressable camera power supplies; XM10a through XM17A. Can someone tell me the output voltage and amperage of any or all of them?
Sales said I could buy them seperately and passed me to tech support for more information. Tech support was less then helpful and told me I couldn't buy them.
XM10A 12 VDC, 80 mA - coaxial plug (XC10A Camera)
XM13A 12 VDC, 80 mA - 1/8 inch stereo plug (XC14A/17A/18A/19A Cameras)
XM14A 12 VDC, 200 mA - 1/8 inch stereo plug (Ninja Pan 'n Tilt base + camera)
Input for all is 120 VAC, 60 Hz
Units with stereo plug have dual outputs, one switched, the other not switched.
Units respond to the X10 On and Off powerline signals per codewheel address; they do not respond to the All_Units_Off signal.
Turning one unit On turns Off the other units in its group of 4 (like radio buttons).