X10 Community Forum

🖥️ActiveHome Pro => Plug-ins => MyHouse Online => Topic started by: Snoochy on October 12, 2006, 10:52:26 AM

Title: Security Arm Status
Post by: Snoochy on October 12, 2006, 10:52:26 AM: I'm sure this question has been asked before, but I can't seem to find it through my search. So here is the question. In myHouse, the Security Arm Status icon never shows my home DS7000 system as being armed despite the fact that it is. I armed it with the proper remote, not a macro. Is this a known bug and when will it be fixed? Hopefully my pictures get attached...

Thanks!
Title: Re: Security Arm Status
Post by: JMac on October 12, 2006, 11:43:22 AM: Mine works perfectly (at least the icon!), but didn't until I moved the computer as far away from the interface as the usb cable would allow and unplugged my PDA(don't know if that last had anything to do with it), but the CM15A wasn't receiving the signal properly. Since you get the activity indication, you seem to be getting some of the RF signal.
Title: Re: Security Arm Status
Post by: JMac on October 12, 2006, 11:47:22 AM: Also does your remote have the symbol in the upper right part of the module?
Title: Re: Security Arm Status
Post by: Snoochy on October 13, 2006, 08:55:33 AM: Thanks for the update, I will try your suggestions. I have not added the control to my desktop either, so I will try it to see. Just as a clarification, on my computer at home, the icon does change. My issue is that the icon does not change when I log in remotely from my office with myHouse...don't know if that makes a difference or not for you.
Title: Re: Security Arm Status
Post by: JMac on October 13, 2006, 09:08:51 AM: I'm not sure about arming with the MyHouse PlugIn. Some one knows the answer in this forum.
Title: Re: Security Arm Status
Post by: Snoochy on October 13, 2006, 09:41:14 AM: No problem. Hopefully someone will respond. Just as a final clarification, I am not arming my security system remotely. I do it as I leave my house in the morning (for example). As far as I know, the icon changes to "armed" on ActiveHome Pro on my home notebook connected to my controller. But my issue is when I arrive at the office, remotely log into my system through myHouse, I see the same little icon on the screen, but it does not show it as "armed". I don't know if it matters, but it just seems funny that it does not display the same status as it does at the house.

Thanks
Title: Re: Security Arm Status
Post by: Charles Sullivan on October 13, 2006, 11:30:24 AM: Quote from: Snoochy on October 13, 2006, 09:41:14 AM
No problem. Hopefully someone will respond. Just as a final clarification, I am not arming my security system remotely. I do it as I leave my house in the morning (for example). As far as I know, the icon changes to "armed" on ActiveHome Pro on my home notebook connected to my controller. But my issue is when I arrive at the office, remotely log into my system through myHouse, I see the same little icon on the screen, but it does not show it as "armed". I don't know if it matters, but it just seems funny that it does not display the same status as it does at the house.

Thanks

A bug I noticed (and reported) in OnAlert 3.206 is probably related:
If the system is armed with a security remote the "armed" icon is correctly displayed in the status bar. But if AHP is closed, the "unlocked" icon appears when it is reopened. A macro conditioned on the system being armed still works correctly however.
Title: Re: Security Arm Status
Post by: JMac on October 13, 2006, 02:23:35 PM: You are correct about the icon. I just tried it on the MyHouse PlugIn and it indicates a "unlock" on the remote computer but a "armed" on the home computer. However, the activity page shows the system to be armed.
Title: Re: Security Arm Status
Post by: Dan Lawrence on October 13, 2006, 03:23:35 PM: Sounds like either the MyHouse PlugIn or the MyHouse Server has a bug in it. MyHouse is supposted to show a true status always when viewing the home computer remotely.
Title: Re: Security Arm Status
Post by: Snoochy on October 13, 2006, 04:53:01 PM: Being a Newbie and all, my question is how do we ensure X10 is made aware of it and it is being worked on? Based on my reading of this forum, I hear plenty of frustrated comments that nothing happens when they call X10. Just curious.
Title: Re: Security Arm Status
Post by: Charles Sullivan on October 13, 2006, 04:55:32 PM: Quote from: Dan Lawrence on October 13, 2006, 03:23:35 PM
Sounds like either the MyHouse PlugIn or the MyHouse Server has a bug in it. MyHouse is supposted to show a true status always when viewing the home computer remotely.

The bug is in either the OnAlert plugin or AHP itself. It's observed locally on the PC and I don't have the MyHouse plugin installed.
Title: Re: Security Arm Status
Post by: Charles Sullivan on October 13, 2006, 05:20:50 PM: Quote from: Snoochy on October 13, 2006, 04:53:01 PM
Being a Newbie and all, my question is how do we ensure X10 is made aware of it and it is being worked on? Based on my reading of this forum, I hear plenty of frustrated comments that nothing happens when they call X10. Just curious.

X-10 does read bug reports on these forums. However they have to be able to reproduce the bug before they can fix it, and to do that they need complete information. When reporting a bug, include the versions of your operating system, AHP, and all plugins you have installed. And this is important: also include the simplest test case and step-by-step procedure for demonstrating the bug.

I am a software developer myself (no affiliation with the X-10 company), and it's pretty exasperating to get a message like "The software doesn't work" with no other information, and then you've got to try to drag the details out of the reporter. (I'm exaggerating a little but not by much.)
Title: Re: Security Arm Status
Post by: Tuicemen on October 17, 2006, 07:24:21 PM: Quote from: Snoochy on October 13, 2006, 04:53:01 PM
Being a Newbie and all, my question is how do we ensure X10 is made aware of it and it is being worked on? Based on my reading of this forum, I hear plenty of frustrated comments that nothing happens when they call X10. Just curious.
I have stared a thread for On Alert problems and bugs!
if you have anyting to add feel free to do so!
Topic: Software problems v3.206 (OnAlert) (Read 216 times) (http://www.x10community.com/forums/index.php?topic=10433.0)

X10 Staff do read these forums regularly!
Posting to them they are slow to do! ;) :D
Title: Still??? Security Arm Status
Post by: PajamaGuy on August 15, 2008, 10:14:08 AM: Search result from 2006 indicates MyHouse did not indicate armed status - is that still true? (Mine doesn't)