...I find the MS's I have in high traffic areas all too often clutter the airwaves with useless RF transmissions, that sometimes useful MS signals get missed by AHP and are not triggering their Macros properly. Having the ability to turn them ON & OFF remotely would also free up some Status Flags and simplify some Macros...
How about splitting off the high traffic area Motion Sensors onto a separate HouseCode, with their RR501/TM751 controlled by an AM486 as needed?
The MS's will still transmit and be received by the CM15A to cause AHP to sometimes misbehave. ;)
(By misbehave, I mean they can interfere with other less traffic motion sensors from being recognised by AHP.)
- DISABLE all Transceived HouseCodes in AHP
- DISCARD any TM751s and only use RR501s (with PLC Collision Avoidance)
I find the MS's I have in high traffic areas all too often clutter the airwaves with useless RF transmissions, that sometimes useful MS signals get missed by AHP and are not triggering their Macros properly. Having the ability to turn them ON & OFF remotely would also free up some Status Flags and simplify some Macros.
I would like a MSxxA Motion Sensor that can receive an X10 RF ON & RF OFF signals