X10 Community Forum
🎭Entertainment => Problems and Troubleshooting => Topic started by: mkanty on January 07, 2007, 07:55:57 PM
-
I just purchased the VK30A (VT30A Trans & VR30A Rec) system for a stereo wireless application. Have hooked the RCA jacks into the tape out on my stereo and the transmitter - on the other end have rec. hooked to speakers. Have both units turned on and just 10 feet apart but getting really poor signal - poor quality sound with static, etc., ust sounds like a really poor radio playing. Have tried all 4 channels on bottom of unit and repositioning both sender & rec. with no results. Any ideas???
-
I just purchased the VK30A (VT30A Trans & VR30A Rec) system for a stereo wireless application. Have hooked the RCA jacks into the tape out on my stereo and the transmitter - on the other end have rec. hooked to speakers. Have both units turned on and just 10 feet apart but getting really poor signal - poor quality sound with static, etc., ust sounds like a really poor radio playing. Have tried all 4 channels on bottom of unit and repositioning both sender & rec. with no results. Any ideas???
Yes... the VR30A has RCA outputs that actually emits a RF, and is intented to go to a TV, VCR or amplifier....but not directly to speakers.
You may want to look at the Power sounder transmitter / receiver; http://www.x10.com/entertainment/vk59a_s_ps29.html
-
Dah! Thanks for your help. The lighbulb went off last night when I really started to think about it.