X10 Community Forum

🖥️ActiveHome Pro => Plug-ins => MyHouse Online => Topic started by: jelester on January 16, 2007, 11:43:33 AM

Title: Lines in picture
Post by: jelester on January 16, 2007, 11:43:33 AM
Tuicemen.
I have a a problem with my cameras.  I just recently added a router to my dsl for being able to use a wireless laptop. 
I now have lines going through my camera view.  I am sure the router and cameras are using the same frequency.  What can I do about getting rid of the lines beside moving the router(which I tried) or turning it off which works.

Jerry
Title: Re: Lines in picture
Post by: Brian H on January 16, 2007, 04:28:59 PM
Have you tried all 4 of the cameras frequencies with the small switch under the rubber plug? Don't forget the receivers switch on the bottom to match the camera.
Also try the router on different channels. Maybe you can find a combination that works.
Title: Re: Lines in picture
Post by: Tuicemen on January 16, 2007, 05:43:45 PM
jelester  
Do as Brian suggested! I'm not sure if your router channel can be changed If not check the manual to find out exactly what frequency it is using then set the cams and the video receiver channel to the one farthest from the routers!
There is a post on here explaining the channel frequencies, a search may turn it up!
Title: Re: Lines in picture
Post by: HA Dave on January 16, 2007, 08:07:47 PM
The post I think Tuicemen is refering to is here (http://www.x10community.com/forums/index.php?topic=5852.0[/color)

You'll even find a great Frequency (Ghz) chart (reply #12 by netguy) there.
Title: Re: Lines in picture
Post by: Tuicemen on January 16, 2007, 08:30:16 PM
Thanks Dave that was the thread I was thinking of! ;)