X10 Community Forum
🖥️ActiveHome Pro => Plug-ins => Smart Macros => Topic started by: lynnymoore on July 22, 2007, 05:05:50 PM
-
I have a Smart Macros that lists Active Eye sensor/MS16A (B1) to trigger Porch Light/SocketRocket(B4) on, turn on a camera/XX16A(B1), record a snapshot, delay 3 minutes and turn (B4) off. The Active Eye sensor does not trigger the macro and if I manually trigger the macro, then the light sometimes turns on but no snapshot and then the light will not turn off. Basically, nothing works as designed and I am stumped. I have an arsenal of filters and repeaters, etc. I can run everything through the AHP, i.e. turn on the porch light, turn on the camera, take a picture and turn off the light, but the macro will not work nor will the sensor trigger anything.
Any ideas?
-
Wireless cameras work in sets of 4. In your case the B4 [Socket Rocket] on will turn off B1 [Camera]; B2 and B3.
Not good to have same address for triggers and devices.
Not using Macros myself, so I hope examples will be provided by users with macros.
-
As Brian stated:
Wireless cameras work in sets of 4. In your case the B4 [Socket Rocket] on will turn off B1 [Camera]; B2 and B3.
Not good to have same address for triggers and devices.
Not using Macros myself, so I hope examples will be provided by users with macros.
You have more than one situation which will cause problems!
See TTA's post HOUSECODES: By Room or By Module Type or By Function or...? (http://www.x10community.com/forums/index.php?topic=9899.msg57946#msg57946) For suggestions as to which codes to use for each
- Keep your cameras to their own House code (no other x10 device on that code Except a pan&tilt)
- Put your sensors on there own codes remembering the plus one address.
- Sensors send a off command after 2 min (by defalt) of no movement detected, so having a device on the same unit number as the sensor will turn off once the sensor sends that command(ok if you want that!)
- Don't use a macro address that is the same as a device your trying to control
[/color] [/b]