X10 Community Forum
📸Cameras & Camera Software => Camera General Discussion => Topic started by: birdzeye on October 13, 2007, 01:15:13 PM
-
Hi,
I was wondering if the Ninja scanpad remote will control cameras not using the pan- and- tilt- base? I only want to buy ONE camera remote control for multiple cameras that will include any upgrading I may do in the future. I phoned customer service and the rep said it does but the website info seems to indicate it only controls the pan-tilt-base.
Can anyone clarify this for me?
-
Hi,
I was wondering if the Ninja scanpad remote will control cameras not using the pan- and- tilt- base? I only want to buy ONE camera remote control for multiple cameras that will include any upgrading I may do in the future. I phoned customer service and the rep said it does but the website info seems to indicate it only controls the pan-tilt-base.
Can anyone clarify this for me?
The CR15A Pan 'n Tilt remote has buttons for 4 cameras.
-
Charles Sullivan,
OK thanks, but do the 4 cameras have to be sitting on Pan n Tilt bases or can they just be ordinary cameras on their own?
-
Charles Sullivan,
OK thanks, but do the 4 cameras have to be sitting on Pan n Tilt bases or can they just be ordinary cameras on their own?
They can just be ordinary X10 cameras of the type which are shipped with an X10 programmable power supply.
BTW, if you don't have a Ninja Pan 'n Tilt platform, you can use almost any X10 RF remote (plus a transceiver), e.g., the HR12A PalmPad or one of the Universal Remotes with X10 RF. Or even a plug-in MiniController. The logic is in the X10 programmable camera power supply - when one power supply is turned On, the others within the same group of four unit codes (1-4, 5-8, etc) turn themselves Off.
-
BTW, if you don't have a Ninja Pan 'n Tilt platform, you can use almost any X10 RF remote (plus a transceiver), e.g., the HR12A PalmPad or one of the Universal Remotes with X10 RF. Or even a plug-in MiniController. The logic is in the X10 programmable camera power supply - when one power supply is turned On, the others within the same group of four unit codes (1-4, 5-8, etc) turn themselves Off.
So what would be the difference b/w the ScanPower Director $49.99, the HR12A PalmPad $19.99 and the MiniController $12.99 besides the price if I'm using, say, 4 cameras?
[Tuicemen edited: fixed quote and combine 2 posts asking same question ]
-
Charles Sullivan,
BTW, if you don't have a Ninja Pan 'n Tilt platform, you can use almost any X10 RF remote (plus a transceiver), e.g., the HR12A PalmPad or one of the Universal Remotes with X10 RF. Or even a plug-in MiniController. The logic is in the X10 programmable camera power supply - when one power supply is turned On, the others within the same group of four unit codes (1-4, 5-8, etc) turn themselves Off.
So what would be the difference b/w the ScanPad Director Remote $49.99 and the HR12A PalmPad $19.99 besides the price if I want to use multicams?
With the HR12A you'd press the button corresponding to the camera you want to view.
I don't own a CR12A or CR13A, but from the instruction sheets it looks like you can rotate through four cameras by repeatedly pressing the same button.
http://software.x10.com/pub/manuals/cr12a-is.pdf
http://software.x10.com/pub/manuals/cr13a-is.pdf
Wade through the special deals at http://www.x10.com today. They're offering 4 for 1 on the CR12A, 5 for 1 on the HR12A and 6 for 1 on the CR13A. Or check X10 authorized reseller stores on eBay for better prices on individual pieces. (Avoid the surplus dealers.)
-
Yep it will.