X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: mickvazquez on October 18, 2007, 10:51:23 AM

Title: about dimmensions of some products
Post by: mickvazquez on October 18, 2007, 10:51:23 AM

Hi,
this is the first time I'm going to buy X10 products and I live in Mexico. Can anybody give me the dimmesions of the Module Super Socket SR227? I just want to make sure it will fit in the holes I have already at the walls.
saludos Mick

Title: Re: about dimmensions of some products
Post by: Charles Sullivan on October 18, 2007, 03:05:15 PM

Quote from: mickvazquez on October 18, 2007, 10:51:23 AM

Hi,
this is the first time I'm going to buy X10 products and I live in Mexico. Can anybody give me the dimmesions of the Module Super Socket SR227? I just want to make sure it will fit in the holes I have already at the walls.
saludos Mick

This X-10 SR227 unit has date code sticker 00A03
--------------------------------------------------------------------
Spacing between mounting bracket holes is 3.3 inches.
Width of body of unit is 1.7 inches.
Height of body of unit is 2.75 inches.
Depth behind mounting bracket is 1.4 inches.  (Overall thickness is 1.7 inches.)
Protruding mesa section for hole in "Decora" style cover plate is 1.3 x 2.625 inches.
The three wire leads on the unit are approx 0.175 inches in diameter (including insulation).

Title: Re: about dimmensions of some products
Post by: mickvazquez on October 19, 2007, 09:16:04 AM

Quote from: Charles Sullivan on October 18, 2007, 03:05:15 PM

Quote from: mickvazquez on October 18, 2007, 10:51:23 AM

Hi,
this is the first time I'm going to buy X10 products and I live in Mexico. Can anybody give me the dimmesions of the Module Super Socket SR227? I just want to make sure it will fit in the holes I have already at the walls.
saludos Mick

This X-10 SR227 unit has date code sticker 00A03
--------------------------------------------------------------------
Spacing between mounting bracket holes is 3.3 inches.
Width of body of unit is 1.7 inches.
Height of body of unit is 2.75 inches.
Depth behind mounting bracket is 1.4 inches.  (Overall thickness is 1.7 inches.)
Protruding mesa section for hole in "Decora" style cover plate is 1.3 x 2.625 inches.
The three wire leads on the unit are approx 0.175 inches in diameter (including insulation).

Title: Re: about dimmensions of some products
Post by: mickvazquez on October 19, 2007, 09:16:52 AM

tks a lot Charles!