X10 Community Forum

📸Cameras & Camera Software => Legacy non Wi-Fi X10 Cameras => Camera General Discussion => Multview and Webview => Topic started by: beaudeni on December 25, 2007, 10:17:05 AM

Title: TWO VA11A
Post by: beaudeni on December 25, 2007, 10:17:05 AM
TRY TO USE TWO VA11A IN SAME TIME FOR TWO DIFFERENT CAMERA (SC23A AND VK74A) IN WINDOWS VISTA . BUT RECONISE ONLY ONE CAMERA A TIME. PLEASE HELP MY .
TANK !
Title: Re: TWO VA11A
Post by: Tuicemen on December 26, 2007, 11:38:45 AM
TRY TO USE TWO VA11A IN SAME TIME FOR TWO DIFFERENT CAMERA (SC23A AND VK74A) IN WINDOWS VISTA . BUT RECONISE ONLY ONE CAMERA A TIME. PLEASE HELP MY .
TANK !
Welcome aboard beaudeni!
A couple of suggestions first![li]Please don't post in all caps it is seen as shouting (and hard on my old eyes)[/li]
[li]Second do an Advanced Search on VA11A you find much info, some may be helpful for later issues![/li][/list][/b]
Now for your Problem:
You'll have a problem running any two identical pieces of hardware at the same time in windows, but there are workarounds!
Question: Why do you feel you need to use two?
If you wish to view both cams at the same time you'll need additional hardware!
X10 software will only accept one capture device!