X10 Community Forum

🛡Home Security => Problems and Troubleshooting => Topic started by: O-Zone on April 03, 2008, 04:42:59 PM

Title: CM19A and X10 modules
Post by: O-Zone on April 03, 2008, 04:42:59 PM

Hi all,
i have bought a CM19A to have control over my home with X10 modules. MS14A works perfecly. But i had also a DS10A that i'm not able to communicate with CM19A. Also my keychain KR10A is not able to send signal to CM19A.

It's my fault or there's something to set/modify to let CM19A works with KR10A and DS10A ?

Thanks, O-Zone

Title: Re: CM19A and X10 modules
Post by: Tuicemen on April 03, 2008, 06:06:16 PM

A CM19A can't see the signals from security devices like the CM15A with ActiveHome Pro can! :(
KR10A is a security remote key flob DS10A is a security door or window sensor!
In order to use the security devices you'll need either the DS7000 alarm console and or Activehome Pro(CM15A)

Title: Re: CM19A and X10 modules
Post by: O-Zone on April 04, 2008, 04:44:38 AM

Ok, so the CM15A can receive that X10 Extendend codes. I live in Italy and we have 220v power lines. Can i get a CM15A from USA (110v) and use a transformer to change 220v to 110v and use it for X10 ?

Thanks, Michele

Title: Re: CM19A and X10 modules
Post by: Dan Lawrence on April 04, 2008, 07:41:37 AM

Actually, you can get X10 in Europe from http://www.x10europe.com/   It will probably serve your needs. X10USA only sells to the US and Canada.

Title: Re: CM19A and X10 modules
Post by: Tuicemen on April 04, 2008, 09:06:52 AM

O-Zone:   Actualy there is a Active Home Pro EU version and a CM15-EU (http://storepro.maison-domotique.com/boutique/index.php/voir_fiche/2220/cm15/cm15_-_interface_pc_(x10)_usb_%2B_logiciel_activehome_pro_eu.php) (page is in french)
You may find it else where too!
The AHP-EU software is free I have a link on my web site! ;)