X10 Community Forum

🖥️ActiveHome Pro => Plug-ins => OnAlert => Topic started by: Ruben Alejandro on June 16, 2008, 10:47:19 PM

Title: Problem on configure OnAlert with Active Home Pro
Post by: Ruben Alejandro on June 16, 2008, 10:47:19 PM
I have active home pro and Door/Window Sensor (DS10A) sensors i have the remote control KR10A. Now i installed al the modules and detect perfect on Active Home Pro. Bu the proble is i donīt know how to use i only see on active home pro the DS10A sensors how open and close but donīt do nothing the active home pro at the bottom on active home pro appears a system armed/away like the manual say but donīt do nothing. I made a simply macro to detect the position of the DS10A but how activate taht macro? or any condition to run 24 hours a day because after made the macro i need to put a timer that have only on start function and if i need monitor all day i need to make each minute an start. I donīt know then ho to make my macro or a condition run 24 hours a day and does the conditions i want. In other words if someone can tell me step by step how to use that modules of security on active home alert.
Thank you
Title: Re: Problem on configure OnAlert with Active Home Pro
Post by: zach1234 on June 17, 2008, 04:21:32 PM
Try reading and improving your above post. I don't understand what your trying to say, are you not seeing activity.
Title: Re: Problem on configure OnAlert with Active Home Pro
Post by: tom j on September 24, 2008, 04:09:32 AM
Quote from: zach1234 on June 17, 2008, 04:21:32 PM
Try reading and improving your above post. I don't understand what your trying to say, are you not seeing activity.

Yeah me either.

Tom j.
Title: Re: Problem on configure OnAlert with Active Home Pro
Post by: steven r on September 24, 2008, 09:59:33 AM
English may be a 2nd language for him.
Anyway his original post was over 3 months ago back in June. Hopefully he has solved his problem now.