X10 Community Forum
🛡Home Security => Problems and Troubleshooting => Topic started by: Mountainrivera on June 21, 2008, 01:15:15 PM
-
New user I setup 9 zones. Get repettitive beeps when I try to arm but no zones show as trouble spots. I held down the bypass button to view zone 9 but no luck. Thnx
-
Unplug - Pull the battery - reinsert battery, install (1) remote then add the zones back one-at-a-time, test-arming after each. (you can hand-hold the unplugged DS7000 as you go from zone to zone - installing & testing as you go)
-
Try like he said I had that same problem except mine had 52 sensors so they kept sending the check back code and registering on the wrong consol. Too bad there isn't a delete one option.
-
Thanks. Didn't work. I tried with a couple of devices and every time it beeps constantly.
-
Just found the answer on google (not on this forum). -:) I had the main unit set to max and it beeps for 60 seconds before it arms.