X10 Community Forum
🛡Home Security => Problems and Troubleshooting => Topic started by: J6Q6 on September 05, 2008, 12:15:50 PM
-
Just curious if anybody else has experienced this...3 out of my 6 door/window sensors just went dead, even with brand new batteries...they just suddenly stopped working almost within days of each one failing....granted I bought these around Sep '04, I would have expected these to last longer..
does anyone know the cause? or is it just poor quality (of the electronics)...
-
Many times when the batteries are replaced in the door/window sensors, you need to press and hold the test button for 10 seconds. When you release it, the LED should give a few blinks to let you know it is working again. When you do this, you are resetting its security code; so you will have to re-register them with the PS561 and/or AHP w/OnAlert.
-
thanks for the info but have tried it several times TO NO AVAIL...leds will not blink or light up at all :-[
-
This may seem obvious to some, but it's possible that the batteries have started to leak. Do you see any corrosion on the battery terminals?
-
no rust or corrosion..used the exact same batteries that were working for the other 3 sensors and also tried brand new batteries, still to no avail...
-
no rust or corrosion..used the exact same batteries that were working for the other 3 sensors and also tried brand new batteries, still to no avail...
Cold solder joints?
Otherwise, not to sound glib, but I have four words for you:
Ebay is your friend. :)
Or waiit for another X10 sale.