X10 Community Forum

💬General Category => General Discussion => X10 Product Wish List => Topic started by: knolish on November 22, 2008, 09:50:46 PM

Title: Compact Flourescent Bulb RF Choke
Post by: knolish on November 22, 2008, 09:50:46 PM
What I'd like to see is something the size of the socket rocket, or smaller, that has a built in RF choke, or whatever voo-doo is needed, to filter out compact fluorescent bulbs.  I'm not necessarily looking for something that can control the bulb, just something that I can install to help filter out the noise that interferes with X10 operation.

Title: Re: Compact Flourescent Bulb RF Choke
Post by: Dan Lawrence on November 22, 2008, 10:36:56 PM
What noise?   I use CFLs in Socket Rockets and do not get noise.  Appliance modules cause some CFLs to "blink" when off, the cure is a cube tap and a 4-watt night light. No blink, plus a built-in burned out bulb in the night light - the "blink". 
Title: Re: Compact Flourescent Bulb RF Choke
Post by: Brian H on November 23, 2008, 07:11:47 AM
Would have to be a special filter for the X10 power line frequency as some generic filters actually degrade X10 signals as noise.
The noise may depend on the CFL brand and model. I have dissected some CFLs and their inputs vary greatly. Some do have a built-in choke and cap filter. Some have the cap after the choke some before. Some none at all.  ::)
I have seen some CFLs make noise on my ELF ESM-1 Tester but using a scope shows the noise may not be near the zero crossing so it may not effect the X10 signals too greatly.

Are you having problems with CFLs and X10 signals?