X10 Community Forum

🛡Home Security => Problems and Troubleshooting => Topic started by: shazam on February 13, 2009, 12:51:03 AM

Title: PR511 Floodlights Motion turns on light during the day
Post by: shazam on February 13, 2009, 12:51:03 AM
I am recently re-introduced to x10 technology, so I am a newbie.  I started almost thirty years ago playing with x10 on a Radio shack Color Computer with a multi-pack interface.  After I moved on to PC's, I left X10 behind.  Now I have gotten re-interested.  I need some assistance configuring my PR511 floodlights.  I want to use the motion sensor on the lights, but I don't want the lights to come on during the day when it sees motion.  The product description can be read several ways and is a little confusing.  If I set the switch to "Sensor", the unit detect motions fine, but turns on the lights whether it is day or night.  That doesn't make much sense to me.  If I set the switch to Dusk, the lights come on at dusk and stay on all night.  I just want the lights to come on when motion is detected until the timeout occurs.  Are these units capable of using the motion sensor to turn on the lights at night, but not during the day?
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: HA Dave on February 13, 2009, 10:51:27 AM
..........  I want to use the motion sensor on the lights, but I don't want the lights to come on during the day when it sees motion.  The product description can be read several ways and is a little confusing. 

Here we go the Wiki (http://kbase.x10.com/wiki/Turn_Lights_On_Only_At_Night) has a nice bit on that. Having the lights come on (only at night... only when they see motion) is what the floodlights are all about... at least thats how I use mine. But don't forget about all the other stuff those lights can turn on/signal.

My X10 floodlights also turn on cameras and a BVC Voice warning at night (http://www.youtube.com/watch?v=tkAwQ4KXkHA).

P.S. Welcome to the forum shazam... and welcome back to X10.
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: shazam on February 13, 2009, 11:00:43 PM
Dave,

Thanks for the response, but I think I didn't do a good job of saying what I wanted.  Is it possible to use the motion sensor on the PR511 during the day, but only have the motion sensor turn on the lights at night?.  I want to use the motion sensor during the day to turn on cameras and fire macros, but not turn on the lights.  Is that what yours do?  The Wiki instructions read like if you set dusk to the 6 o'clock position it operate the lights at night with the motion sensor, but no motion detected during the day.  I am the only one out there that wants to do this?

Thanks for your assistance,
Shazam
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: X10 Ken on February 14, 2009, 12:15:35 AM
Thanks for the response, but I think I didn't do a good job of saying what I wanted.  Is it possible to use the motion sensor on the PR511 during the day, but only have the motion sensor turn on the lights at night?.  I want to use the motion sensor during the day to turn on cameras and fire macros, but not turn on the lights.  Is that what yours do?  The Wiki instructions read like if you set dusk to the 6 o'clock position it operate the lights at night with the motion sensor, but no motion detected during the day.  I am the only one out there that wants to do this?

You want to do what many many people want to do (including myself).  However, the unit is not designed to do that.

From what I can tell you have two choices:

1.  This is what I have done.  Set the DUSK setting so that the unit works day and night.  Then have AHP turn the unit off as soon as it turns on if it is daylight out.

2.  Disable the motion detection completely and add a stand alone motion detector.  Then program AHP to turn in the light if motion is detected AND it is dark out.

I hope this helps.

Ken
===
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: BaBaLou. on February 14, 2009, 05:24:07 AM

Not sure since I have no PR511,

But can you use the socket rocket plugged in the two lights sockets of the flood light and then try and control that with macros?

just a thought, someone with them can try to see if it will be compatible.
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: HA Dave on February 14, 2009, 10:24:41 AM
.... Is it possible to use the motion sensor on the PR511 during the day, but only have the motion sensor turn on the lights at night?. 

Yes. Think of using the sensor... with no lights.. that should give you the effects you want. Now leave the lights in-place (attached to the fixture - but NOT wired to the sensor) You can wire the lights to a motion sensor (only) mounted nearby (around a corner is nice) or just mounted to a switch (even an X10 switch).

I think the light sensor adjustment... will allow the unit to detect motion even in bright light. If not.. you might be able to do a simple mod and cover the light sensor with electrical tape.
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: dave w on February 14, 2009, 06:51:36 PM
shazam

There are simpler ways to skin this cat. Put a couple of "Dusk to Dawn" adapters in the PR511 sockets.
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: HA Dave on February 14, 2009, 09:37:06 PM
There are simpler ways to skin this cat. Put a couple of "Dusk to Dawn" adapters in the PR511 sockets.

Brilliant!

Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: shazam on February 15, 2009, 12:25:46 AM
X10Ken,BaBalou, Dave X10 L, Dave W

Thank You all for your suggestions.  I appreciate you making the effort to help me.

X10Ken,
I am glad to hear I am not the only one that encountered this problem.  Because I couldn't really find any posts about this particular complaint I thought I might be doing something wrong.  I have tried the macro during the daytime trick and it works.  The only problem is my first line of defense (The DOGS) are outside during the day, and set the detector off repeatedly.  Still, its better than leaving the lights turned on for five minutes or so every time.  I have also tried the secondary motion detectors and that works, with a small delay.  I was just trying to use the PR511 to their fullest advantage.
BaBaLou,
That's an interesting idea.  I haven't tried that yet.  Since the floodlights are under the eaves of my house, maybe I can get by without any weather/moisture related issues.  I'll try it and let you know.
Dave X10 L,
That's an interesting thought.  I'll have to ponder exactly how I could put that to use.  HHHMMM.  That might just do what I want it to!    Thanks.
Dave W,
Forgive my ignorance, I am new to this stuff.  What are dusk to dawn adapters?

General,
You know, its a darn shame that these units aren't capable of using the motion sensor independant of turning the lights on ???.  They have to already have the internal logic to do this, because there have separate internal sensors for day/night and motion.  X10 has them at a real good price right now (16.50) and I would love to buy more, but I want to solve this problem first.  I can't believe some of the Electronics wizards on this forum haven't come up with a mod for this  :'.  It should be something as simple as a switch and logic to say that both motion and dusk have to exist to turn on the lights -:).

I have given each of you a helpful!  Thanks again for your sugestions.  Any Wizards out there want a challenge?

Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: HA Dave on February 15, 2009, 10:53:54 AM
..............  The only problem is my first line of defense (The DOGS) are outside during the day, and set the detector off repeatedly.

Dogs.... does that mean there is a fence and gate involved? If so you can use a wide gap magnetic reed switch (http://www.automatedoutlet.com/product.php?productid=388&cat=0&page=1) and a powerflash module (http://www.x10.com/security/x10_pf284.htm) to get an X10 signal on your powerline.



Dave W,
Forgive my ignorance, I am new to this stuff.  What are dusk to dawn adapters?
........You know, its a darn shame that these units aren't capable of using the motion sensor independant of turning the lights on ???.

Crap... the new forum still doesn't take my images "sensor adapter (http://www.convexcentral.com/ccc-lighting-controls-dusk-dawn.htm)".


Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: X10 Ken on February 15, 2009, 12:49:19 PM
The only problem is my first line of defense (The DOGS) are outside during the day, and set the detector off repeatedly.
You know, its a darn shame that these units aren't capable of using the motion sensor independant of turning the lights on ???.

Any motion detector X10 or not will have a problem with the dogs.  One solution would be a beam detector with the beam just above dog height.  As far as I know X10 doesn't make a beam unit, so you would have to get one made for an alarm system and run it through an X10 unit (I forget the model number).

Another way to avoid dogs is to mount your motion sensor just above dog height and insert a deflector below it to keep it from seeing anything lower than itself.

Ken
===
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: dave w on February 15, 2009, 04:34:14 PM
X10Ken,BaBalou, Dave X10 L, Dave W

Thank You all for your suggestions.  I appreciate you making the effort to help me.

Dave W,
Forgive my ignorance, I am new to this stuff.  What are dusk to dawn adapters?


Sorry Shazam,
They are light socket adapters that screw into a outdoor light socket and then the light bulb screws into the adaptor. The outdoor light is left ON all the time and the adaptor has a photocell that senses light/dark conditions, and supplies power to the bulb only if it is dark, and turning the light OFF when light out. So your PR511 floodlights would only come on when dark if you had the adaptors in the sockets. Maybe there are more common names but you can pick them up at Home Depot, Lowes, Walmart, even Walgreens for about $5.
http://www.touchandglow.com/product-p/s-700w.htm
http://www.amazon.com/Dusk-Light-Socket-Photocell-White/dp/B000HOSZNS
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: dave w on February 15, 2009, 04:43:50 PM
There are simpler ways to skin this cat. Put a couple of "Dusk to Dawn" adapters in the PR511 sockets.

Brilliant!



Thanks, I guess I got a synapse to fire.  rofl
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: shazam on February 17, 2009, 12:10:45 AM
Dave_W, Dave_x10_L and x10 Ken,

Thanks for all the assistance and great suggestions.  You guys gave me alot of info and ideas to work with.  I have several things to try, and I'm sure I can come up with something that achieves what I was trying to do.  I still would love to see some electronics wizard come up with a simple mod to these units to allow it to sense motion all the times but only turn on the lights after dusk  :'   >*<, I have looked at the schematics, but I don't have the electronics experience to figure it out..... yet.

Thanks again for all your useful suggestions, and making me feel welcome on the forum!

Happy X10ing
Shazam
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: cobom1628 on December 20, 2009, 09:48:30 AM
This topic might be dead, I am new to X-10 and see a lot on the web about alternatives - but I do not see the capabilities that X-10 offers. Anyway, I bought the PR511 (4 of them) because the idea of wired motion sensors is MUCH better than battery operated MS14s strewn around - just seams more 'solid' to me.

I am really surprised that this device does not operate floods during motion at night, while leaving the motion detector sensing during the day without turning on lights, after all - that is what you are trying to do - detect an intruder in a monitored area!

I am going with this (uses HomeControlAssistant or equivilent software): I split a circuit going to the floodlight - 120v goes straight to the white/black like normal, the other goes to a junction box to a wired outlet. The lights from the floodlight (blue/white) are wired to a an extension cord that is plugged into a lamp module LM465) - plugged into the outlet.
I set PR511 to D1 and +1 is in, set the LM465 to L2. A D2 ON is detected by HCA, a macro sends L2 ON if NIGHT, does nothing if DAY - and the same for the OFF. The WS467 remote switch might be a better option - higher wattage and a more "wired in" look.

Still - having to create a work-around for a product this mature seems REALLY out there - come on X-10.
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: HA Dave on December 20, 2009, 11:27:10 AM
I split a circuit going to the floodlight - 120v goes straight to the white/black like normal, the other goes to a junction box to a wired outlet. The lights from the floodlight (blue/white) are wired to a an extension cord that is plugged into a lamp module LM465) - plugged into the outlet.
I set PR511 to D1 and +1 is in, set the LM465 to L2. A D2 ON is detected by HCA, a macro sends L2 ON if NIGHT, does nothing if DAY - and the same for the OFF. The WS467 remote switch might be a better option - higher wattage and a more "wired in" look.

Don't underrate your creativity.... not everyone thinks of these things. But it's a good thing you posted.. its these kinds of posts that give me ideas.

I had setup a two-sensor sensor (http://davesdomainonline.com/os/samples.htm). I hadn't thought of it (like your idea)... or I could just used a wired-in module (or even an appliance module converted to a wired-in module). I set mine up with Occupancy Sensing (http://davesdomainonline.com/os/sensing.htm) so it only triggers when I am gone (or manually set). That way I can garden, mow, bar-B-Q, or whatever without the voice warning or video captured (http://www.youtube.com/watch?v=tkAwQ4KXkHA).

I am a BIG fan of the PR511 floodlights myself. They are a nice solid solution. Thanks for sharing cobom1628 .
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: Dan Lawrence on December 20, 2009, 12:07:19 PM
X10Ken,BaBalou, Dave X10 L, Dave W

Thank You all for your suggestions.  I appreciate you making the effort to help me.

X10Ken,
I am glad to hear I am not the only one that encountered this problem.  Because I couldn't really find any posts about this particular complaint I thought I might be doing something wrong.  I have tried the macro during the daytime trick and it works.  The only problem is my first line of defense (The DOGS) are outside during the day, and set the detector off repeatedly.  Still, its better than leaving the lights turned on for five minutes or so every time.  I have also tried the secondary motion detectors and that works, with a small delay.  I was just trying to use the PR511 to their fullest advantage.
BaBaLou,
That's an interesting idea.  I haven't tried that yet.  Since the floodlights are under the eaves of my house, maybe I can get by without any weather/moisture related issues.  I'll try it and let you know.
Dave X10 L,
That's an interesting thought.  I'll have to ponder exactly how I could put that to use.  HHHMMM.  That might just do what I want it to!    Thanks.
Dave W,
Forgive my ignorance, I am new to this stuff.  What are dusk to dawn adapters?

General,
You know, its a darn shame that these units aren't capable of using the motion sensor independant of turning the lights on ???.  They have to already have the internal logic to do this, because there have separate internal sensors for day/night and motion.  X10 has them at a real good price right now (16.50) and I would love to buy more, but I want to solve this problem first.  I can't believe some of the Electronics wizards on this forum haven't come up with a mod for this  :'.  It should be something as simple as a switch and logic to say that both motion and dusk have to exist to turn on the lights -:).

I have given each of you a helpful!  Thanks again for your sugestions.  Any Wizards out there want a challenge?



I use a PRO Wall Switch Appliance Module to control my PR511.  It contains the timers to control the 511.  If I need the 511 on I still have the 511 established in AHP.
Title: Re: PR511 Floodlights Motion turns on light during the day
Post by: eagle on January 05, 2010, 11:35:33 PM
I'm in the process of getting a couple of the PR511s installed and was trying to figure out how I'd accomplish exactly what shazam is asking.

Thank goodness for the forum.

Now, at least I have a workaround to "deactivate" the lights during the day.

r,
eagle