X10 Community Forum
🖥️ActiveHome Pro => SDK => Third Party Add-Ons & Software => Topic started by: Elfmaze on April 13, 2009, 02:25:22 PM
-
Bit of an odd issue this time. when i sample the At&t Audrey voice from the control panel of my computer it sounds correct. But when playing thru PCC the voice sounds "tinny". Any ideas?
It is a 16khz voice if that helps
-
The only thing i can think of is does anyone else use a 16khz voice with pcc? I can't find any settings for anything.
-
16 Khz or 16 bit? There's a big difference.
-
it does say 16khz - http://www.nextup.com/attnv.html
from AT&Ts site(maby refering to the demo voices:
"The speech output audio format is a simple WAV (a.k.a. RIFF) file. The sample rate is 16KHz 16-bit linear, i.e. 16,000 samples per second, each sample a 16-bit integer, mono (not stereo)."
-
Anyone have any ideas? PCC is the only program that does not use the voice properly. I have been scouring up and down trying to find an answer. Hate to say it but i'm running out of resources
-
What is PCC? In my world, PCC is a type of streetcar.
-
PC Companion. Software from Tuicemen. Weather reports, sound, vcr commander, batch files, cameras, dialer....etc... ;)
-
Thanks for the "heads up" >!
-
No Problem! >!
-
Elfmaze
Sorry for the slow reply.
I've been busy at the log cottage and will be for some time as I've finally got around to getting the inside chinked. :-[ ::) :'
I haven't been able to recreate your issue here have you tried to reinstall PCC?
I noticed while trying to install it on my laptop I got some unexpected errors on starting. A reinstall fixed it! ::) :'
Also others have reported issues with net frame work and a reinstall of it fixed their issues with PCC.
Since PCC uses the MS Speech SDK same as BVC you should experience the same issue with it.
If a reinstall doesn't cure your issue Email me and I'll dig a little deeper!
I am able to get email at the cottage using the neighbours wireless but it is to slow to sit at their fire pit and get on the forums.