X10 Community Forum

🛡Home Security => Problems and Troubleshooting => Topic started by: spam4us on September 15, 2009, 09:52:37 PM

Title: ds7000 earpiece & Powerflash
Post by: spam4us on September 15, 2009, 09:52:37 PM
Does the recording you make for the DS7000 play thru the earpiece when the DS7000 is tripped?  If so, then here's my next question.

Will a tripped DS7000 trigger a powerflash interface if I:

cut the wires from the earpiece supplied with the DS7000

plug the earpiece jack into the DS7000

and then connect the cut wires to a powerflash interface
??
essentially
DS7000-------->earpiece------>Powerflash

If this is the case, I'm thinking that I could then put the DS7000 on a filter so that the lights on/off sequence is not on the powerline (blocked by the filter) and then I'll be able to control what I would like to do using Active Home Pro based on the Powerflash house/unit code trigger?

essentially
DS7000-------->earpiece------>Powerflash
   |                                             |
   |                                             |
Filter                                         110 v
   |
   |                                             
110 V