X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: dbemowsk on January 13, 2010, 07:34:36 PM
-
I was looking at some of the inline modules for my setup, but I cannot seem to find one that will work with a ceiling fan. Do they make a dimming module that will work for inductive loads? I am looking at them for my current ceiling fan/lighting fixtures to dim the lights and control the fan speed.
Dan
-
No, there is no inline dimmers for inductive load control.
You could hack one by putting an inductive dimming wall switch (XPDI3) in a box above the fan. But be advised the fan will buzz or hum with an "inductive" dimmer. It isn't real bad but probably too loud for a bedroom.
There is only one PLC - X10 wall switch will not cause the fan to hum. It uses capacitors to change the fan speed rather than triac control (three speeds).
http://www.hometech.com/modules/loswitch.html#LO-CCWHISPW