X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: lee911 on April 27, 2010, 01:52:19 AM

Title: Socket Rocket Trouble
Post by: lee911 on April 27, 2010, 01:52:19 AM

I'm new to the X10 world and slowly am getting everything figured out. Except for one thing: the Socket Rocket!

I'm running AHP 3.326 with the CM15A. I have an Eagle Sensor, LM486 and LM465- all of which I've got to work.

What is the trick to the LM15A? I want to screw it into a socket and have the sensor activate it. Just getting AHP to turn the light on is impossible. I've attempted a new code (three times after powering up), nothing seems to work.

Any SIMPLE and easy suggestions??

Title: Re: Socket Rocket Trouble
Post by: Brian H on April 27, 2010, 06:27:10 AM

Are you trying to use the motion sensors on and off signal to trigger a macro or trying to transceive the motion sensors signal to directly control the Socket Rocket?

One way to use AHP to program a new address in a Socket Rocket:
http://kbase.x10.com/wiki/Programing_Your_Socket_Rocket_Without_A_Remote