X10 Community Forum

🖥️ActiveHome Pro => SDK => Third Party Add-Ons & Software => Topic started by: josevaello on August 07, 2010, 02:48:08 AM

Title: Alhena. control over the image of your IP camera.
Post by: josevaello on August 07, 2010, 02:48:08 AM

With the new software   (ALHENA), you can click directly on the actual image captured by a camera Ip, without icons. You can click on a light, a curtain, an awning, etc. in real time and observe the response of the element.
You can download it for free in alhenaing.com

Title: Re: Alhena. control over the image of your IP camera.
Post by: ximet64 on April 12, 2011, 01:42:59 PM

Could you explain how you are going to control the lights by detecting presence?. Is it possible to control multiple lights with the same camera. ?

Thak you.

Title: Re: Alhena. control over the image of your IP camera.
Post by: josevaello on April 13, 2011, 03:24:04 AM

 You can mark as many areas of a picture as you like,  on these areas can send two types of orders.

 OFF orders, if after a while the camera does not detect the presence in that area.


 ON Orders, If presence is detected and not detected in a contiguous area, to prevent false activations due to changes in ambient light.


 Very simple, and of course a camera can control several lights or appliances.

Title: x10 AXIS CAMERA
Post by: josevaello on January 28, 2012, 12:41:59 PM

With this software you can integrate the axis  ip cameras in your x10 system, and control x10 modules by motion detection.

Free download at:

www.automation-x10.us

Title: Re: x10 AXIS CAMERA
Post by: Dan Lawrence on January 28, 2012, 01:42:00 PM

Ok, where is Axis located?   United States, Canada or Europe.   The website doesn't say.