X10 Community Forum

🖥️ActiveHome Pro => SDK => Third Party Add-Ons & Software => Topic started by: lowrider3121 on August 22, 2010, 11:08:46 PM

Title: looking to get X10 commands to work with Cyberbuddy
Post by: lowrider3121 on August 22, 2010, 11:08:46 PM
Looking to see if anyone knows how to get X10 commands into Cyberbuddy with Ultra Hal plug-in using Ms Agent characters and Kate16 voice
Title: Re: looking to get X10 commands to work with Cyberbuddy
Post by: hawk1 on August 23, 2010, 10:41:22 AM
I have done this with Answerpad.  You'll have to download the ahpsdk, if you don't already have the ahcmd.exe file.  The ahcmd.exe file is the command line for controlling x10 modules.  Then I had to make batch files for the command I wanted.  Then I used a program called Batch to Exe to convert the batch files into executive files (.exe).

Then if your AIBot runs programs, use the command to run the newly created files.

I'm not using Cyberbuddy but most of these virtual assistant programs are pretty much alike.   The sdk can be found here:  http://kbase.x10.com/wiki/Activehome_Pro_SDK  just click on installation.

The batch to exe program; I can't remember where I got it but you can do a google search and find it or any other conversion program.  Hope this helps you out.
Title: Re: looking to get X10 commands to work with Cyberbuddy
Post by: lowrider3121 on August 23, 2010, 01:31:19 PM
Thanks for your help now have to make sure cyberbuddy runs programs >!
Title: Re: looking to get X10 commands to work with Cyberbuddy
Post by: hawk1 on August 23, 2010, 01:37:24 PM
Your very welcome!  And if you need any more info I'll try to steer you in the right direction.   >!