X10 Community Forum

🖥️ActiveHome Pro => Plug-ins => Smart Macros => Topic started by: SPSACH on October 11, 2010, 10:03:26 PM

Title: Macro Not Working
Post by: SPSACH on October 11, 2010, 10:03:26 PM

I have a simple macro to turn on a light using WS467 Switch when a sensor detects motion, delay for 2 minutes and then turn it off. However it is not working even when I see the Icon on the ActiveHomePro turns green

TRIGGER CONDITIONS A1 ON and
Module Status On - DuskSwitch (A14 - Turned on at dusk and off at dawn)
End Trigger Condition
Turn GarageSwitch (D2) On
Wait for 2 minutes
Turn GarageSwitch (D2) Off
Store in Interface

I have looked at the activity Monitor. Here is what it shows:
A1 On
D2 (GarageSwitch)
D Bright 100% (GarageSwitch)
D2 (GarageSwitch)
A1 Off
D2 (GarageSwitch)
D Off

It has functioned a few times but is very erratic.

I'd appreciate any help

Title: Re: Macro Not Working
Post by: -Bill- (of wgjohns.com) on October 12, 2010, 01:13:16 AM

Under Tools-Preferences...  Macro Options tab.  Make sure "Issue 'On' in place of 'Bright 100%' " is checked.
 >!