X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: kilo on December 10, 2010, 08:47:56 PM

Title: CM15A and one code
Post by: kilo on December 10, 2010, 08:47:56 PM

Hello all.
First, I have to CM15A's and they are doing the same thing.
It seems my interfaces will only send on the PL, code A2 and this is using 2 different programs, Activehome Pro and Homeseer Pro.
Im not sure if anything needs to be setup properly.
Has anyone experienced this or have heard of this problem?

Thanks

Kilo

Title: Re: CM15A and one code
Post by: Brian H on December 11, 2010, 06:24:04 AM

You mean if you setup a module on lets say A5 and toggle it from the screen. No A5 on and off is sent?

Title: Re: CM15A and one code
Post by: Dan Lawrence on December 11, 2010, 02:16:47 PM

Does AHP and Homeseer Pro work together or does Homeseer conflict with AHP? 

Title: Re: CM15A and one code
Post by: kilo on December 11, 2010, 06:56:20 PM

Brian yes and Dan, I dont use the two together.
It just seems that A2 is the only code my cm15a's will send.
Ive tried almost all of them and nothring.
If I use my cm19a with a tm751, everything works, in both software.
Thats why Im wondering if there is something with the firmware on the pics of the refurb cm15a's that are coming out now.
This problem has happened since day one and of course, no response from x10.

Thanks

Kilo

Title: Re: CM15A and one code
Post by: Brian H on December 11, 2010, 07:08:42 PM

Good test. So AHP and the CM19A with TM751 work fine and the refurbished CM15A does not.
It does sound like the CM15A maybe a good candidate for the problem.
What version of AHP do you have?

Title: Re: CM15A and one code
Post by: kilo on December 11, 2010, 07:49:02 PM

Cant remember the numbers but I know its the latest one that is on the websites download area