X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: Squirrel1162 on May 09, 2011, 09:15:59 PM

Title: SC546A Chime
Post by: Squirrel1162 on May 09, 2011, 09:15:59 PM

Is it possible to easily change the tone or length of the current tone of the chime?  I want to use one on the front and back doors, and be able to tell which is which.  Thanks.

Title: Re: SC546A Chime
Post by: Brian H on May 10, 2011, 06:00:56 AM

I have not seen any mods for what you are looking for.
I believe all the timing and tones are in the controller chips programming.

Title: Re: SC546A Chime
Post by: lviper on May 10, 2011, 10:54:03 AM

Modifications for the X10 Chime Module

http://www.laureanno.com/x10-mod2.html

Title: Re: SC546A Chime
Post by: Brian H on May 10, 2011, 01:52:10 PM

That modification is for one hardware version of the chime module.
If yours is a different revision. Then it may not be possible.
I know mine don't look like the ones in the modifications.
Looking at the PC Board would give you clues.