X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: harrydr on June 16, 2011, 02:49:27 PM

Title: Install SH10A
Post by: harrydr on June 16, 2011, 02:49:27 PM

Any way or macro to install SH10A Powerhorn to work with AHpro.

Title: Re: Install SH10A
Post by: Brian H on June 16, 2011, 03:20:17 PM

The SH10A needs a continuous stream of, one second On Off cycles to its address or an All Light, On All Units off to its House Code.
Takes four cycles to trigger it. So sending it a simple On or Off will not trigger it.

Adding it to AHP may not be an available option. I could not find it in the modules list of AHP.

If you want it to ding dong. Send it an On command to its address. Then send bright and dim commands to its House Code. It will ding and dong.

Another thought. I don't have On Alert Plug In so I don't know if it can be added if you have On Alert.