X10 Community Forum
🛡Home Security => Home Security General => Topic started by: bravoland on July 19, 2011, 07:52:11 PM
-
I have the DS7000 (or whatever the old school black alarm box) i am looking at upgrading to a SC1200
My question is.(on the DS7000) if i set the alarm from within the house using the Away you have like 60 seconds to exit the house and that annoying beeping that goes on about 1 beep per second until it's set
what does the sc1200 do once you set the alarm in away mode and proceed to leave? does it beep every second for 1 minute as well?
-
If you use the Arm Away Button on the SC1200 it it has a defult sixty second exit delay.
This delay can be set in the Delay Options to a different time.
If you are using the SH624 remote. How it acts depends on the Min-Max switch position.
It does ding every second on an Arm Away from the SC1200 Console.
Disabling the chime in the options menu stops the Door/Window Sensors from chiming when the zone is opened.
http://kbase.x10.com/wiki/SecuriLINK_Home_Security_System
ftp://ftp.x10.com/pub/manuals/SC1200-OM.pdf