X10 Community Forum
🛡Home Security => Problems and Troubleshooting => Topic started by: rlcohen7 on October 17, 2011, 11:53:15 AM
-
I have had this security system for many years. In addition to the PS561 security consol, I have 6 door/window sensors and 4 indoor motion detectors. Recently the consol has begun chiming 5 times for no apparent reason, no LEDs are lit on the console. Also when I try to set the alarm I get the rapid chiming normally indicative of an open window or door, but none are open and neaither are any of the LEDs lit on the console. I tried resetting the system several times to no avail. Any clues as to why this is hapopening?
Bob C.
-
Perhaps the batteries are low in one of the sensors?
-
Here are a few links to information.
http://kbase.x10.com/wiki/Protector_Plus_Wireless_Voice_Dialer_Security_System
http://kbase.x10.com/wiki/Identifying_and_Fixing_Low_Battery_Warnings
http://kbase.x10.com/wiki/System_Chimes_and_Does_Not_Arm
If the problem Zone is 9-16 you have to hold the BYPASS Button for the Zones LED to light and indicate the problem.
-
The problem started just after I replaced batteries in all of the sensors and detectors.
-
Thanks for your help. I found the cause of my inability to set an alarm - a magnet on window sensor slipped down. Hopefully , fixing this will also fix the 5 chime problem.
-
Thanks for your help. I found the cause of my inability to set an alarm - a magnet on window sensor slipped down. Hopefully , fixing this will also fix the 5 chime problem.
Did that solve your problem ???
Tom j.