X10 Community Forum
🎭Entertainment => Entertainment General => Nstinct Remote => Topic started by: sazzam on December 08, 2011, 01:01:09 PM
-
Problem with Nstinct Remote controlling Direct TV HD H24 box
I have a DirectTv HD H24 receiver. I am having trouble with channels that are more than one digit.
Example: Channel 7 works immediately.
Channel 295 you have to keep the remote pointing to the receiver because the Nstinct pauses between each digit.
If I move my remote away while the 3 digits (ex channel 255) is still populating, I might end up with channel 25 or 55.
Please help.
-
The remote sends one digit at a time. You can try to minimize the idle time between sending digits. Press Home/Setup/Advanced/Options. Set the "Key Transit Time" to its lowest setting (slider all the way to the left).