X10 Community Forum
🛡Home Security => Problems and Troubleshooting => Topic started by: bill93728 on February 20, 2012, 11:15:43 AM
-
The TM751 triggers on with the system disarmed. It is triggered from the MS10A. How can I configure this to only trigger in the away mode. Thanks.
-
Is this a new system or TM751?
The reason I ask is someone reported their new TM751 didn't have a load relay in it or local trigger button on the front.
They may have also changed the electronics or firmware if you have a real new one.
If you have the date code on the TM751 it may give us more information. It is on a small white sticker. Usually on the back.
The TM751 has no power line receiver in it so I doubt the PS561 is changing it.
The MS10A should be sending a security type RF command that the TM751 should ignore.
Let us know if it is new. You may have found a new quirk in the X10 equipment as the MS10A and PS561 should not effect a TM751.